Water Truck 6,000 liters

Gross weight 15,000 kg. Engine: Mitsubishi 6M60 -1AT1 (Euro3) 4-stroke diesel engine, 6 cylinders, direct injection Water cooled With turbo intercooler, Common rail system , Controlled by computer , Cylinder capacity 7545 cc Gear: 6 forward gears, 2 through 6 gears are synchronous.

Water Tank Capacity of water tank is not less than 6, 000 liters. It is an oval-shaped cross-section using stainless steel grade AISI 304, thickness not less than 3 mm. The head-end of the tank is curved. Rounded, the sheet uses stainless steel grade AISI 304, thickness not less than 3 mm. Inside the tank has 2 shockproof sheets, each hole penetrates to allow water to flow through to each other.

Above the tank is a mainhole, not less than 500 mm in diameter, with a lid - open at the edge of the lid - open, must have a rubber gasket to prevent water from spilling out and can lock.

The top has both handrails on both sides. It is long steel throughout the water tank. On the back, both the water has stairs for ascending and descending. The end is equipped with handrails made of stainless steel grade AISI 304, thickness not less than 3 mm.

The walkway on the left and right of the tank has a covered with non-slip steel stripes. Under the walkway has compartment for storing equipment.

Pumps

Can pump water not less than 1400 liters / minute at a speed 1000 rounds / minuite. Pressure not less than 150 pounds per square inch. By using the power connecting system from the engine Suction pipes made of stainless steel of not less than 3 inches in diameter. Transmission pipes made of stainless steel with a diameter of not less than 3 inches. Installed both on the left, right and the back of the car.